|
COUPLER CLOSURE TYPE
NO THREAD The third and BEST type of closure utilizes a pin-and-slot design which requires only a 90 degree movement of the nut to lock, close and compress the "0" ring seal. Detents prevent unintentional opening due to vibration. This design lends itself to easy conversion of existing 8 or 4 pitch threaded couplers to the NO-THREAD concept. such a conversion requires a minimum of time (less than an hour for a set of couplers) and is economical in conversion cost.
|
Operating time (opening or closing) is measured in seconds, rather than
the 5 to 15 minutes that may be required with other types of closures.
TJB HIGH VOLTAGE CABLE
COUPLERS